At high elevations across the Blue Ridge Mountains, solar ultraviolet radiation is up to 25 percent more intense than at sea level. Harsh UV breaks down wood lignin, turning bare timber gray and causing thin store-bought stains to peel within two seasons. We apply professional multi-coat penetrative stain systems from Sashco, Perma-Chink, and Sansin that bond chemically with wood fibers to deliver decades of rich color and weather defense.
Unlike transparent clear coats that let UV radiation burn wood cells beneath, our professional exterior stains contain microscopic trans-oxide iron pigments. These pigments reflect damaging solar wavelengths while accentuating natural grain depth with warm honey, amber, and rich chestnut tones.
Spraying alone merely lays stain on the wood surface. Our certified applicators follow immediately behind the spray tip with heavy 4-inch natural bristle brushes, working the stain deep into pores, micro-checks, and end grain to ensure maximum chemical bonding and uniform film thickness.
Sealing mountain logs with impermeable polyurethane traps interior moisture, causing wood decay beneath the coating. We exclusively apply microporous water-borne and alkyd hybrid stains that allow trapped water vapor to escape while forming an impenetrable water-shedding exterior barrier.
Preserving your log home shouldn't require aggressive blasting every decade. By applying a clear, non-pigmented sacrificial maintenance clear coat every 3 to 5 years on south- and west-facing elevations, you preserve the underlying color coats indefinitely at a fraction of full restoration costs.
South- and west-facing walls exposed to direct sun typically require a clear maintenance coat every 3 to 5 years, while shaded north-facing walls often last 6 to 8 years before requiring service.
Yes, but to achieve a lighter or completely different wood tone, the existing dark or aged finish must first be stripped down to bare wood using dry organic media blasting.
Logs must have a core moisture reading below 18 percent—ideally 12 to 15 percent—measured with a calibrated electronic pin meter to prevent trapped moisture blistering the stain.